General information

How to make vertical flowerbeds for petunias with your own hands - 15 photos

Pin
Send
Share
Send
Send


Many owners of personal plots try to make them beautiful and attractive, breaking up flower beds and flower beds.

Petunia is the most unpretentious and at the same time attractive culture. This plant is able to decorate any cottage.

From the article you will learn how to make your own flowerbeds for petunias, as well as be able to see them in the photo.

Concept of plant

Petunia is an annual plant, but lately there have also been perennial varieties that do not require special care and annual spring planting. Any gardener or gardener can create a magnificent flower bed on his plot. of these flowers, which will delight its magnificent flowering until late autumn.

Necessary conditions for growth

Petunia is an unpretentious plant, but for good growth and luxuriant blooms it is necessary to adhere to some of the rules for planting and farming:

  1. Lighting. Culture responds well to the abundance of heat and light, so constructing a flowerbed is better in an open, well-lit place. Petunia grandiflora requires more sun and heat, and in shaded places it may simply not bloom.
  2. Watering. The culture calmly tolerates a lack of moisture, but it requires watering in dry weather. It grows well in wet places, but it does not tolerate stagnant water. When planting in moist soil, good drainage should be ensured.
  3. The soil. It grows on almost all types of soil, but prefers loams and sandals. It responds well to fertilizers such as compost and humus. Do not feed the plant with fresh manure, as the plant can become infected with fungal diseases. Does not tolerate acidic soil, therefore, when digging up such land, lime should be added to it.
  4. Fertilizers. In the spring and summer, mineral fertilizers and organic matter should be applied to the soil at least 2 times a month.

With proper care, petunia will bush well and give a large number of large inflorescences for a long time.

Recently, breeders bred many varieties that differ: resistance to cold, abundant flowering and decorative. Often this plant is grown as an annual, but in fact there are many hybrids on sale that tolerate adverse weather conditions well and can safely survive the harsh winter. These varieties are perennial, among them are distinguished:

  • ampelous,
  • bush,
  • large-flowered
  • terry,
  • small-flowered.

Types of flower beds and their photos

Flower gardens for flowering plants are divided into the following types:

  1. cascade,
  2. border,
  3. classic flowerbed,
  4. vertical flower bed,
  5. rockeries and others.

Many novice gardeners are wondering: how to build a vertical flowerbed for the queen of the garden - petunias?

Photo vertical flower beds:




Vertical

This type of flower beds is very popular with landscape designers, as it is able to decorate not only the cottage and garden plots, but also any urban courtyard. Vertical flower beds of petunias can be built with your own handswithout the help of experts.

There are several types of vertical beds, which differ in the type of supports and method of attachment - this is:

  • ground vertical structures
  • hanging flower beds
  • wall-based compositions - wall,
  • wall-mounted wall-mounted structures.

For vertical flowerbeds, an ampelous variety of petunia will be ideal.

Advantages and disadvantages

Vertical flower beds have a lot of advantages which caused their popularity:

  1. They take a little place - they are equipped in small plots, gazebos, terraces and courtyards, where there is no possibility to build a full-fledged flower bed.
  2. Quick and easy watering - no need to stretch a long water hose.
  3. Ergonomic - quickly disassembled for storage, and do not take up much space.
  4. Reuse.
  5. Can be moved to another location, if necessary.
  6. Beautiful and spectacular view.

But despite the large number of positives, these flower beds have drawbacks:

  • Quick drying of earthy coma.
  • A small amount of soil that is quickly depleted.

Instructions for arrangement

Vertical flower beds look very impressive and attractive, Consider the most common options for these flower beds that you can make yourself.

There are many ways to create designs from the net for planting petunias, consider the most common and popular.

Plus stones

The use of mesh and natural stones to create a vertical flower bed for petunia will help to decorate and emphasize the harmony of landscape design. To create a flower garden you will need:

  • Galvanized mesh.
  • Pebbles or stones - are selected in accordance with the grid cells.
  • Soil for seedlings.

Performance of work:

  1. To create a vertical flowerbed in the shape of a snail, you need to bend the grid and fix it with pegs driven into the ground.
  2. Then take another piece of stainless material and at a distance of 20-30 cm to install the second wall of the chain-link.
  3. In the gap between the nets, fill the stones in such a way that in the middle there is a small depression under the ground.
  4. Cover the soil and plant the flower seeds. Flower Garden is ready.

Add a pot, geotextiles

This is a very spectacular structure, for the manufacture of which does not require much time and money. From the materials you will need:

  • Large flowerpot.
  • Grid with large cells.
  • Geotextiles, or any other black material.
  • Mounting clamp.

Vertical flower bed is equipped as follows:

  1. Take a large pot and build a pillar of the desired height of the grid, connecting it with clamps.
  2. Inside the post, tighten the geotextiles and fasten it to the top of the structure.
  3. Pour the prepared soil inside the vertical flower garden.
  4. In the places of planting petunias, cut through the textiles, with a finger, make a small depression in the soil and plant the seedlings.

From plastic pipe

Consider two options for the construction of vertical flower beds of this material.

  1. Cut a plastic pipe with a diameter of 100mm into the desired lengths.
  2. Saw each piece along.
  3. Fix the halves on the wall, which is supposed to decorate.
  4. Install a cap at the bottom of the future flower bed.
  5. Pour the soil and plant seedlings of petunias.

  1. Take two pipes - 100mm and 28mm.
  2. Make holes in the pipes, small for water, and large for planting petunias.
  3. A large pipe buried in the ground so that it stood upright.
  4. Insert a smaller pipe in the middle and fill the gap between them with earth.
  5. In the holes to plant the seedlings of ampelous petunia.

Before installing the water pipe you need to wrap it with any cloth, this will not allow water to wash the soil during watering.

Flower pots

This is not a difficult, but rather effective way to create a vertical flower bed. For the construction you need a large metal rod, the length of which should be more than the height of the flower beds by 10-20 cm and the required number of small flower pots to large.

  1. Make holes in the bottom of each pot exactly in the middle, equal to the diameter of the iron rod.
  2. Set the largest pot in the place where it is supposed to break a vertical flower garden.
  3. Drive a rod into the ground, which will be the basis of holding the entire structure.
  4. Pour into the pot in advance prepared soil.
  5. Install a smaller pots, put them on a metal axle and fill with earth.

So set all prepared pots. After that, seeds are sown in the soil or seedlings are planted. Vertical flowerbed ready.

Own hands from improvised means

For the manufacture of such structures, you can use any available material:

  • bags,
  • old bags
  • worn shoes
  • plastic containers
  • glass bottles,
  • old dishes or furniture
  • car tires that have served their time.

Will consider the most affordable and simple way to create a vertical flowerbed is car tires, for this:

  1. The material must be well washed, dried and painted with acrylic paints of different colors.
  2. Build an improvised pyramid or tower from tires.
  3. Fill the structure with a special primer and plant flowers.

Further care of flowers

Petunia is not a capricious plant, but in order for it to grow well and delight in its flowering in a vertical flowerbed, you need to properly care for it:

  1. Increase the number of fertilizing plants with various fertilizers, which should be diluted in water before irrigation.
  2. The flower bed should be installed in an open, sunny place.
  3. Frequent watering. Do not forget that the soil in the flowerbed is small, so it will dry out quickly.
  4. Correctly form bushes by pinching.
  5. During heavy rainfall, protect the flower bed from excessive moisture. This can be done by installing good drainage.

Types of vertical flower beds

Example of ground vertical flower bed for petunia

Vertical beds are divided into several subspecies, depending on the type of construction and method of its mounting:

The shape and general appearance of the vertical beds may differ somewhat, since each creator is guided mainly by his imagination.

Suitable varieties of petunias

Petunia prism sunshine

To buy excellent petunias for a vertical flower bed, you need to be guided by such criteria as abundance of flowering and resistance to diseases, as well as resistance to aggressive environmental conditions.

Check out the following new varieties:

  • "Blue Spark Cascadia" - flowers of violet color,
  • "Supertunia Silver" - light lavender color,
  • "Prism Sunshine" - lemon color,
  • "Lavender Storm" - large pink flowers,
  • “Pretty Much Picasso” is an unusual specimen, the coloring of which combines green, pink and purple, has silver foliage.

Manufacturing

Consider the most popular options for the manufacture of vertical beds for petunia:

    1. From containers. Special containers under the vertical flower bed have long been on sale. All you need is to choose the color matching options.

Vertical flowerbed from ready-made containers

    1. From the grid, or rather from the grid and agrofilms. A metal frame is curved out of the metal mesh and a cylindrical pot with an appropriate diameter is inserted into it. Inside the frame is covered with agrofilm and secure it. Before filling the substrate, the frame is equipped with a hose with holes for irrigation from the inside. Powder the resulting structure with earth. Water the land, let it settle down and fill the pot almost full, then plant the plants.


    1. Of car tires. In this case, there is no need for a frame, and tires themselves can be painted for greater decorative effect.

    1. From construction mesh and stones. The principle of production is similar to the version of the grid and agrofilms.

    1. PVC pipes. Take two tubes and drill holes in them. Petunias will sprout in the outer tube, and the inner tube will be used to supply water and fertilizer. On one side, wrap the irrigation tube with insulating tape and cover it completely with non-woven material.

    1. From flowerpots. On the reinforced base pots shove through the drainage hole in a checkerboard pattern.

    1. From plastic bottles. All you need is to cut them lengthwise, attach them to the wall, and fill them with soil for growing seedlings of petunia.

It looks like a vertical bed of plastic bottles

    1. Out of bag. Handles are sewn to the bag and filled with soil. On the one hand, make cuts where plants are planted. The bag is hanged, and its bottom is covered with oilcloth so that when watering the water does not leak.

  1. From old pallets. The basis of the need to make boxes of wood or plastic. Burlap, netting and straw are laid on the bottom of the box, then the ground is filled up and petunias are planted.

How to make a beautiful flowerbed of perennials tells our next article.

Care for petunias in vertical beds

To grow beautiful petunias in a vertical flower bed it is not enough just to make a flower bed itself and plant flowers, it is also important to take proper care of these seemingly not too whimsical flowers.

Care instructions are as follows:

  • Pamper flowers with special long-lasting supplements rich in minerals and trace elements (read about petunias feeding at home here). From the beginning of summer, petunias need to be fed with complex fertilizers in liquid form, which are diluted in water intended for irrigation,
  • put a flower bed in the sunny part of the garden,
  • plenty of water,
  • in order to avoid chlorosis and other diseases and pests of petunia, fertilizer with iron should also be added to too hard water,
  • systematically remove faded leaves and flowers to form new buds faster,
  • pinch long shoots up to the fourth bud,
  • during rainstorms, it is advisable to hide the pots under a shed,
  • for planting petunias pick up capacious tanks with drainage holes,
  • watering should be done once a day, in the morning or in the evening.

You can find out how to plant petunia seeds in pellets in this article.

Petunias are quite unpretentious colorful flowers that are easy to grow, even in small vertical flowerbeds. It can even beginner.

From this video You will learn how to make a vertical bed for petunias with your own hands:

Types and design of vertical flower beds

Fans of combining flowering plants with non-flowering plants can recommend an alpine slide. For its construction will need a small hill of earth and stones. Stones do not need to put in size, it is important when installing them to keep the shape of the pyramid. Plants are arranged chaotically. Low-growing flowers can safely coexist with high. Of the undersized flowering are considered the most common viola, primula, forget-me-not. Check out interesting photo flower options.

Varieties of alpine slides consider the cascade and the pyramid. They consist of an odd number of tiers. Their difference lies in the fact that the top layer must be completed with stones: flat near the cascade, sharp at the pyramid. Stones can be replaced with bricks (even non-whole) and tree cuts.

One of the most common options is a flower bed in the form of a screen. It is made out with the help of climbing plants and decorates a fence, a porch, an arbor.

The volumetric figure is a type of a bed-screen. With the help of metal or wooden rods any desired shape is created. Climbing plants are planted at the base of the flower bed, which then wrap around the whole figure.

Raised flower beds leave plenty of room for the gardener's work. They can be made from any material at hand. They consist of individual flower gardens, each of which rises above the other, creating a multi-level space.

As a material, you can use tires, buckets, vases, baskets, chairs. Very effectively they look flowering plants of different heights. The shape and size of the raised bed can be any.

Suspended flowerpots are considered the simplest type for execution. They are attached to the fence wall. Only flowers intended for flowerpots can grow in them (only they can bloom in a limited amount of land).

The main advantage of vertical beds is that they do not need to pick plants in color and height. It is not necessary to follow the rules of their placement. So, all the favorite types of flowers will decorate them, delighting the owner of the site.

From plastic bottles

The most common and affordable way to arrange vertical flower beds with your own hands from improvised means is to use plastic bottles of 2–2.5 liters for this purpose. Before they need to wash and remove the labels.

Then the container is cut in half, we need the top half with a lid. It is necessary to make holes in it and thread wire or twine in them - this will be the mount for hanging on a vertical surface. Then the ground is filled up and the seedlings are planted.

This design is inserted into the bottom of the bottle and suspended on the harvested place. Bottles can be placed horizontally. To do this, cut a rectangular hole from the side, and on the opposite side, pierce several drainage holes. Tie the blank with ropes from the side of the neck and bottom. Next, pour the substrate inside and plant flowers.

Another simple way to make a vertical bed of petunias with your own hands is to build structures from old tires. The advantage of this method is that for this design does not require additional support.

The flower bed is constructed by putting tires on one another, thus it is possible to create various forms. Inside the soil is poured and plants are planted. So that the black color of tires does not attract attention, they can be painted with acrylic-based paint in any color, for example green, to match the color of the surrounding vegetation.

Vertical flower beds for petunias can also be made from a regular canvas bag. In order for the earth not to wake up through weaving, a plastic bag can be laid inside. Along the edges should be stitched loops for hanging and cover the ground.

On one side of the bag, holes are cut through every 20 cm, flowers are planted in these “pockets”. Конструкцию подвешивают на выбранное заранее место. В качестве таких емкостей можно использовать старые сумки, портфели.

Красивые клумбы получаются на каркасе из сетки. With its help, you can give the flower garden any shape, for example, make a ball or an animal shape. This process is more labor intensive than the previous ones. You need to complete the following steps:

  1. To begin with, it is necessary to drive posts into the ground.
  2. Next on them to fix the grid and give it the desired shape. The easiest option is a cylinder from the grid. The inner surface is lined with geotextiles.
  3. In the center should be placed tubes with holes for watering.
  4. The next step is to fill the mold with baking powder.
  5. At the end you need to make holes in the geotextiles and plant seedlings of flowers.

PVC pipes

Vertical flower beds of different heights can be built from sewer pipes. To do this, drill holes with a diameter of 2–3 cm along the entire length. After the pipe, bury and fill the substrate. For the stability of the pipe, the length of which exceeds 2 m, it is necessary to dig in 1/3 of its length.

Next, you need to plant seedlings in the holes made. You can also plant the plants with seeds. Then they mix with the soil, which is subsequently poured into the pipe. The sprouted sprouts find the nearest hole and sprout into it. With the help of pipes you can equip high fences and hedges.

From containers

You can also arrange an original flower bed of their flower containers. It can be done in two ways. For the first, an armature is necessary, which is driven into the ground, and a flower pot is put on it, earth is poured and a plant is planted. The next pot is worn at an angle relative to the first.

So the steps are repeated to the top of the reinforcement. Instead of reinforcement, you can use twine or wire, then the upper end should be hung somewhere.

The second method is suitable if your site has an old dried tree. From it you need to remove all the branches and leave only a part of the trunk, on which they attach the containers with screws.

From old pallets

This method is often used for decorating arbors, balconies. The result is a semblance of a picture of flowers. Inside the tank it is necessary to fix the net and seal it with straw or non-woven material. The tank is filled with soil, to which moss-sphagnum can be added, it will function as a moisture accumulator. The last step is sown seeds or planted seedlings. The box is installed vertically at the wall.

Screens of flowers

Screens of petunias can be made with most of the methods described above. Structures made of scrap materials should be suspended in the opening, arch or in advance prepared support. So you can place plastic bottles, PVC pipes, flower containers. As the flowers grow, they will fill the entire space of the opening and, over time, will create a living screen that will serve, for example, to separate zones on your site.

Among the ways described, how beautiful to plant petunias, there is sure to be the most suitable for your garden plot.

How to create a bed of petunias

The private yard owners certainly ennoble blooming cultures. According to aesthetic rules, the decoration of the farmstead is served not by plain beds, but by ornamental garden plants. Lest they crawl around the site and take up too much space (it’s a pity to uproot the cherished beauty!), They are limited to flowerbeds. It turns out such a bouquet of flowers, blooming from early spring to late autumn. It depends on what crops they planted.

To make the flowerbeds in front of the house look bright, you should use flowers in their creation - people from hot countries. This is where the real festival of colors! And for good reason petunia, a native of South America (more precisely - Brazil), is so fond of growing as a flower decorative culture. Its flowers are painted with rich shades of red, pink, orange, lilac and spotty white ... The size of the cup of petals is small, and there is a large one. What is not suitable planting material?

So, having decided on the type of flower, select the flower range. The flower bed can be one-color, or it can be with a gradient of transition from a dark color to a lighter one. What form of picture to choose? Concentric circles, contrasting stripes, the “petals” of a large flower, geometric shapes, and in general fantasy patterns invented by you personally. The main thing is that the pattern is well viewed from the side.

Although petunia occurs in nature and perennial, floriculture common annual form of culture. So even better. Every year you can create different patterns. In different colors.

Along with upright stems, some varieties of petunia have curly stems. Such mini-vines are also beneficial to use in flowerbeds. For a multi-stage design in combination with smooth stems, creepers will come in handy as well as possible.

The root system of petunias is such that it does not need large spaces or tanks. She will get acclimatized in small flower beds. Even in the hollow of an old tree or in a hollowed out stump. Landscape designers recommend unusual solutions! Petunia feels great and as a pot.

Petunia perfectly coexists with other plants. Compositions in combination with levkoy, lion's throat, marigolds, begonias will look spectacular.

The heat of petunias is not afraid. They have immunity. But, as plants of subtropical climate, prefer abundant watering (in any case, not a swamp). Planted these flowers better seedlings and sunny areas, but they will take partial shade.

Petunia is one of the most suitable and not fastidious plants for vertical flowerbeds.

Vertical flowerbed master class step by step

For this vertical flowerbed, take a plastic barrel and make such holes. Then we plant ready seedlings of petunia, as shown in the photo.

The result is a multicolored vertical flowerbed.

Video lesson - how to make a simple vertical bed of plastic bottles

Vertical flowerbed photo gallery



Vertical flowerbed: 3 comments

In the garden, many building materials waste can be put into action, and making beautiful things from them. For example, even from scraps of asbestos-cement pipes it is possible to make a vertical flowerbed.

Due to the peculiarities of the structure of vertical flowerbeds, not all flowers are suitable for their arrangement. The most suitable are considered to be undersized and climbing varieties that have a poorly developed root system and do not need a large amount of soil. In addition, it is these plants will allow you to create an original and harmonious composition.

Vertical flower beds - very original and beautiful flower beds, but also require considerable care. It is necessary to water and fertilize often.

We carry out a bed for petunias

The presented option is easy to do with your own hands.

  • Take a tight bag. Handles are sewn to it. Capacity is filled with soil.
  • On one side it is necessary to make cuts every 20 centimeters. Plants are planted in them.
  • The bag is then placed on a wall or other place.
  • In order that the soil does not fall out, the inner surface is laid out with a film, and the cloth is quilted.

Old bags can be used instead. Also, to create a living wall with your own hands, you can use the canvas, and sew rows of pockets on it.

From bottles

The presented option is easy to make. Washed plastic bottles without labels will be required. The caps are wrapped tightly so that, if necessary, water can drain.

Vertical flowerbed is collected according to the following algorithm.

  • the bottle is cut in half,
  • on the upper part of it, they make a wire or rope mount,
  • the soil is poured into the upper part with the lid - a flower will be placed here,
  • a plastic container will be placed in the bottom of the bottle,
  • Then the structure is fixed to the surface to be decorated.

If desired, the product can be painted.

Classic option

Most gardeners prefer to make a simple version of a bed for vertical type petunias.

  • A metal mesh is taken. From it is cylindrical frame. It is inserted into a pot that fits in diameter.
  • Agrofilm is placed inside the frame. The result should be a tower.
  • Agrofilm should be secured. Before filling the ground, a tube with holes is inserted into the frame, watering will be carried out through it.
  • Soil is poured into the tower. Then it is watered so that the earth settles. So the frame is filled from the inside.
  • In the pot, too, need to seal the ground.
  • Further, the material is cut in the form of "plus" (vertically and horizontally). In the holes will be planting flowers. It remains only to plant a petunia!

Looks like a finished flower garden, you can look at the photo.

You can make an original flowerbed out of a building grid and stones. You can find out how to make it yourself.

Screen of flowers

A great option for making a vertical flower bed - horizontally fixed pipes. If you use heating pipes, it will be necessary to drill holes for petunia; if the drainpipes are used, side plugs are necessary.

This option is best suited for growing petunias. The design includes two pipes. Holes are drilled into them. The inner tube will be used to supply fertilizer and moisture, the outer tube will be used for planting flowers.

The pipe intended for watering is closed with adhesive tape on one side. Among other things, it is necessary to wrap non-woven material.

Watering tube is inserted into the outer tube. Then placed clay and earth. Planting is done in the holes.

Application of old pallets

This method is suitable for decorating a patio, balcony or gazebo.

  • The base is made of plastic or wooden boxes, pallets that you no longer need.
  • On the back of the box set non-woven fabric or mesh, which is used to seal the straw.
  • Next, pour soil into the container.
  • Then you can plant the plants.

Important to remember, that when planting in a vertical flower garden of petunia and other plants of the soil gets a little. It is necessary to select plants, the conditions for the content of which are approximately the same. The best option - unpretentious species such as stonecrop, alpine flowers, moss, ivy, bindweed.

Pin
Send
Share
Send
Send